Compatibility
Components compatible with Pross®
28 prosthetic and CAD/CAM references — mini abutment, transfers, analogues, copings, TiBase and screws — with documented S.M.P. codes, hex sizes and torques.
Pross® line equivalence
Each manufacturer line corresponds to an EFF S.M.P. system, defined by the connection and platform diameter.
| Pross® line | EFF system | Connection | Platform |
|---|---|---|---|
| Cone Morse | A3.1 — Cone Morse CM Ø3.5–5.0 | Cone Morse 11,5° | Rosca Ø1.80 · Plataforma Ø3.5–5.0 |
Component data sheet
Cone Morse · A3.1
O sistema Cone Morse mais difundido do mercado — cobre Neodent CM® e um vasto conjunto de marcas compatíveis.
Prótese parafusada e cimentada
155.05
Tapa Implante
Band: — · Torque: —
105.05.1A – 105.05.1F
Cicatrizador perfil Ø3.30
Band: 0.8 / 1.5 / 2.5 / 3.5 / 4.5 / 5.5 mm · Torque: —
105.05.2A – 105.05.2F
Cicatrizador perfil Ø4.50
Band: 0.8 / 1.5 / 2.5 / 3.5 / 4.5 / 5.5 mm · Torque: —
205.05A.1.CJ
Transfer Moldeira Aberta
Band: — · Torque: —
205.05B.1.CJ / 205.05B.CJ
Transfer Moldeira Fechada (coroa / ponte)
Band: — · Torque: —
305.05
Análogo Híbrido
Band: — · Torque: —
405.05A.1 – 405.05A.4
Munhão Provisório coroa Ø3.8
Band: 0.8 / 1.5 / 2.5 / 3.5 mm · Torque: 20 Ncm
405.05B.1 – 405.05B.4
Munhão Provisório ponte Ø4.5
Band: 0.8 / 1.5 / 2.5 / 3.5 mm · Torque: 20 Ncm
805.05.1A.CJ – 805.05.3B.CJ
Coping Plástica base CrCo (coroa / ponte)
Band: 0.8 / 1.5 / 2.5 mm · Torque: 20 Ncm
00500.1A / 00500.1B / 00500.2A / 00500.2B
Kit Munhão Sólido, Transfer e Coping Plástico (cinta 4.0 mm: .1A/.2A · cinta 6.0 mm: .1B/.2B)
Band: 4.0 / 6.0 mm · Torque: 20 Ncm
Pilar múltiplo e unitário
1105.05A.CJ – 1105.05F.CJ
Mini Pilar Reto
Band: 0.8 / 1.5 / 2.5 / 3.5 / 4.5 / 5.5 mm · Torque: 20 Ncm
1105.05.1A.1.CJ – 1105.05.1C.2.CJ
Mini Pilar Angulado 17° (com / sem exact)
Band: 1.5 / 2.5 / 3.5 mm · Torque: 20 Ncm
1105.05.2A.1.CJ – 1105.05.2B.2.CJ
Mini Pilar Angulado 30° (com / sem exact)
Band: 1.5 / 2.5 mm · Torque: 20 Ncm
1105.05.4A.CJ – 1105.05.4F.CJ
Micro Pilar Reto
Band: 0.8 / 1.5 / 2.5 / 3.5 / 4.5 / 5.5 mm · Torque: 20 Ncm
1105.05.1A.CJ – 1105.05.1E.CJ
Pilar GT
Band: 0.8 / 1.5 / 2.5 / 3.5 / 4.5 mm · Torque: 20 Ncm
905.05A.CJ – 905.05E.CJ
EsthetiOne 3.8®
Band: 1.0 / 2.0 / 3.0 / 4.0 / 5.0 mm · Torque: 20 Ncm
CAD/CAM
9105.05A.CJ
Scan Intraoral Titânio
Band: — · Torque: —
9700.A / 9700.1A
Scan-Body Large / Small
Band: — · Torque: —
6805.05.5A – 6805.05.4A
Link CAD/CAM TiBase Large / Coroa
Band: 0.8 / 1.5 / 2.5 / 3.5 / 4.5 mm · Torque: —
6805.05.1B – 6805.05.4B
Link CAD/CAM TiBase Large / Ponte
Band: 1.5 / 2.5 / 3.5 / 4.5 mm · Torque: —
6805.05.5A.S – 6805.05.4A.S
Link CAD/CAM Small / Anti-rotacional
Band: 0.8 / 1.5 / 2.5 / 3.5 / 4.5 mm · Torque: —
6805.05.5A.D – 6805.05.4A.D
Link Dinâmico Large / Coroa
Band: 0.8 / 1.5 / 2.5 / 3.5 / 4.5 mm · Torque: —
6905.05A
Interface para Zircónia
Band: 1.5 mm · Torque: 20 Ncm
330.01.1L / 330.01.1S
AnálogoLink Large / Small
Band: — · Torque: —
735.01A / 735.01
Coping Plástico para Link Large / Small
Band: — · Torque: —
Parafusos
2103.22A.2 / 2103.22A.3
Parafuso Hexagonal (h 0.8–2.5 / 3.5–4.5 mm)
Band: — · Torque: 20 Ncm
2103.22F.2 / 2103.22F.3
Parafuso 360° (h 0.8–2.5 / 3.5–4.5 mm)
Band: — · Torque: 20 Ncm
2103.09A
Parafuso da Interface para Zircónia
Band: — · Torque: 20 Ncm
Frequently asked questions about Pross®
Do EFF components fit Pross® implants?
Yes. The S.M.P. systems A3.1 reproduce the connection and platform of the Cone Morse lines from Pross®, in medical-grade titanium with CE marking.
What torque should I apply to components compatible with Pross®?
The documented torques for these systems are 20 Ncm. Always use a calibrated torque wrench and follow the clinical case protocol.
Are the components original Pross®?
No. They are compatible EFF components, manufactured independently. Pross® is a registered trademark of its manufacturer and has no connection with EFF Dental Ibérica.
Is there a mini abutment compatible with Pross®?
Yes. The Regular Platform Mini Abutment (M.P system) sits on the intermediate abutment and offers the full prosthetic and CAD/CAM line, with a prosthetic torque of 10 Ncm.
Related technical articles
Pross® is a registered trademark of its respective manufacturer. EFF Dental Ibérica is an independent company and manufactures compatible, not original, components.
Quote for Pross® components
Tell us the implant line and quantities. A specialist replies within 2 working hours with the matching code list.