Compatibility
Components compatible with Derig®
45 prosthetic and CAD/CAM references — mini abutment, transfers, analogues, copings, TiBase and screws — with documented S.M.P. codes, hex sizes and torques.
Derig® line equivalence
Each manufacturer line corresponds to an EFF S.M.P. system, defined by the connection and platform diameter.
| Derig® line | EFF system | Connection | Platform |
|---|---|---|---|
| CMH Ø3.5 | K3.2 — Conical Connection® Ø3.5 | Cónica interna | Rosca Ø1.60 · Plataforma Ø3.50 · Implante Ø3.50 |
| Tri NP / WP | K2.2 — Replace Select Tri-Channel® Ø4.3 RP | Tri-Channel | Rosca Ø2.00 · Plataforma Ø4.30 · Implante Ø4.30 |
Component data sheet
CMH Ø3.5 · K3.2
Compatível com a conexão cónica Nobel Biocare® NP e equivalentes.
Prótese parafusada e cimentada
Conventional workflow · on the implant
Traditional impression with alginate/silicone in a tray. Sequence: 1st healing abutment and 2nd transfer (chairside); 3rd analogue, 4th temporary abutment or plastic UCLA and 5th CrCo-base UCLA (in the lab). Even the temporary parts are made in grade 5 titanium (Ti-6Al-4V).
155.06
Tapa Implante
Band: — · Torque: —
105.06A – 105.06C
Cicatrizador perfil reto Ø3.50
Band: 3.0 / 5.0 / 7.0 mm · Torque: —
105.06.6A – 105.06.6C
Cicatrizador perfil divergente Ø5.0
Band: 3.0 / 5.0 / 7.0 mm · Torque: —
205.06A.CJ
Transfer Moldeira Aberta
Band: — · Torque: —
205.06B.CJ
Transfer Moldeira Fechada
Band: — · Torque: —
305.06
Análogo Híbrido
Band: — · Torque: —
405.06A / 405.06A.1 / 405.06A.2 (coroa) · 405.06B (ponte)
Munhão Provisório — coroa cinta 1.5 / 2.5 / 3.5 mm; ponte apenas cinta 1.5 mm
Band: 1.5 / 2.5 / 3.5 mm (ponte: 1.5 mm) · Torque: 20 Ncm
805.06A.CJ / 805.06A.1.CJ / 805.06A.2.CJ (coroa) · 805.06B.CJ (ponte)
Ucla Plástica base CrCo — coroa cinta 1.5 / 2.5 / 3.5 mm; ponte apenas cinta 1.5 mm
Band: 1.5 / 2.5 / 3.5 mm (ponte: 1.5 mm) · Torque: 20 Ncm
Pilar múltiplo e unitário
Intermediate abutment · chosen chairside
Seats directly on the implant and is chosen by the clinician. It converts the connection into a regular platform: on top of the Mini Abutment the same M.P. line is always used, shared by almost every implant.
1105.06A.CJ – 1105.06D.CJ
Mini Pilar Reto
Band: 1.5 / 2.5 / 3.5 / 4.5 mm · Torque: 20 Ncm
1105.06.1A.CJ / 1105.06.1B.CJ
Mini Pilar Angulado 17°
Band: 2.5 / 3.5 mm · Torque: 20 Ncm
1105.06.2A.CJ / 1105.06.2B.CJ
Mini Pilar Angulado 30°
Band: 3.5 / 4.5 mm · Torque: 20 Ncm
1705.06A – 1705.06C
Pilar Bola
Band: 1.5 / 2.5 / 3.5 mm · Torque: 20 Ncm
905.06A.CJ – 905.06C.CJ
EsthetiOne 3.8®
Band: 1.0 / 2.0 / 3.0 mm · Torque: 20 Ncm
CAD/CAM
Digital workflow · on the implant
Alternative to the conventional workflow for digital users. The whole line is used in the lab: 1st the scan (choose one) and 2nd the CAD/CAM link.
9105.06A.CJ
Scan Intraoral Titânio
Band: — · Torque: —
9700.A / 9700.1A
Scan-Body Large / Small
Band: — · Torque: —
6805.06A.4 – 6805.06A.3
Link CAD/CAM TiBase Large / Coroa
Band: 0.5 / 1.5 / 2.5 / 3.5 mm · Torque: —
6805.06A.1.S – 6805.06A.3.S
Link CAD/CAM TiBase Small / Coroa
Band: 1.5 / 2.5 / 3.5 mm · Torque: —
6805.06B.1
Link CAD/CAM TiBase Large / Ponte
Band: 1.5 mm · Torque: —
6805.06A.4.D – 6805.06A.3.D
Link Dinâmico Large / Ponte
Band: 0.5 / 1.5 / 2.5 / 3.5 mm · Torque: —
6905.06A
Interface para Zircónia
Band: — · Torque: —
330.01.1L / 330.01.1S
AnálogoLink Large / Small
Band: — · Torque: —
735.01A / 735.01
Coping Plástico para Link Large / Small
Band: — · Torque: —
Parafusos
Fixation
Screws for the components above, at the stated torque.
2102.02C
Parafuso Unigrip
Band: — · Torque: 20 Ncm
2102.02F
Parafuso 360°
Band: — · Torque: 20 Ncm
2102.08C
Parafuso da Interface para Zircónia
Band: — · Torque: 32 Ncm
Tri NP / WP · K2.2
Conexão tri-canal compatível com Nobel Biocare® Replace Select® RP.
Prótese parafusada e cimentada
Conventional workflow · on the implant
Traditional impression with alginate/silicone in a tray. Sequence: 1st healing abutment and 2nd transfer (chairside); 3rd analogue, 4th temporary abutment or plastic UCLA and 5th CrCo-base UCLA (in the lab). Even the temporary parts are made in grade 5 titanium (Ti-6Al-4V).
152.02
Tapa Implante
Band: — · Torque: —
102.02A – 102.02C
Cicatrizador
Band: 3.0 / 5.0 / 7.0 mm · Torque: —
202.02A.CJ
Transfer Moldeira Aberta
Band: — · Torque: —
202.02B.CJ
Transfer Moldeira Fechada
Band: — · Torque: —
302.02
Análogo Híbrido
Band: — · Torque: —
402.02A / 402.02B
Munhão Provisório (coroa / ponte)
Band: — · Torque: 32 Ncm
802.02A.CJ / 802.02B.CJ
Ucla Plástica base CrCo (coroa / ponte)
Band: — · Torque: 32 Ncm
Pilar múltiplo e unitário
Intermediate abutment · chosen chairside
Seats directly on the implant and is chosen by the clinician. It converts the connection into a regular platform: on top of the Mini Abutment the same M.P. line is always used, shared by almost every implant.
1102.02A.CJ – 1102.02D.CJ
Mini Pilar Reto
Band: 1.0 / 2.0 / 3.0 / 4.0 mm · Torque: 32 Ncm
1102.02.1A.CJ – 1102.02.1C.CJ
Mini Pilar Angulado 17°
Band: 2.0 / 3.0 / 4.0 mm · Torque: 32 Ncm
1102.02.2A.CJ – 1102.02.2C.CJ
Mini Pilar Angulado 30°
Band: 3.0 / 4.0 / 5.0 mm · Torque: 32 Ncm
1702.02A / 1702.02B
Attachment EQUA
Band: 1.0 / 2.0 mm · Torque: 32 Ncm
CAD/CAM
Digital workflow · on the implant
Alternative to the conventional workflow for digital users. The whole line is used in the lab: 1st the scan (choose one) and 2nd the CAD/CAM link.
9102.02A.CJ
Scan Intraoral Titânio
Band: — · Torque: —
9700.A
Scan-Body Large
Band: — · Torque: —
6802.02A.1 – 6802.02A.3
Link CAD/CAM TiBase Large
Band: 0.6 / 2.0 / 3.0 mm · Torque: —
6902.02A
Interface para Zircónia
Band: — · Torque: 32 Ncm
330.03.1L
AnálogoLink Large
Band: — · Torque: —
735.01A
Coping Plástico para Link Large
Band: — · Torque: —
Parafusos
Fixation
Screws for the components above, at the stated torque.
2104.02C
Parafuso Unigrip
Band: — · Torque: 32 Ncm
2104.02F
Parafuso 360°
Band: — · Torque: 32 Ncm
2104.04C
Parafuso da Interface para Zircónia
Band: — · Torque: 32 Ncm
Frequently asked questions about Derig®
Mini pilar compatível com Derig →Do EFF components fit Derig® implants?
Yes. The S.M.P. systems K3.2, K2.2 reproduce the connection and platform of the CMH Ø3.5, Tri NP / WP lines from Derig®, in grade 5 titanium (Ti-6Al-4V) with CE marking.
What torque should I apply to components compatible with Derig®?
The documented torques for these systems are 20 Ncm, 32 Ncm. Always use a calibrated torque wrench and follow the clinical case protocol.
Are the components original Derig®?
No. They are compatible EFF components, manufactured independently. Derig® is a registered trademark of its manufacturer and has no connection with EFF Dental Ibérica.
Is there a mini abutment compatible with Derig®?
Yes. The Regular Platform Mini Abutment (M.P system) sits on the intermediate abutment and offers the full prosthetic and CAD/CAM line, with a prosthetic torque of 10 Ncm.
Related technical articles
Derig® is a registered trademark of its respective manufacturer. EFF Dental Ibérica is an independent company and manufactures compatible, not original, components.
Quote for Derig® components
Tell us the implant line and quantities. A specialist replies within 2 working hours with the matching code list.